Evolution of the lithosphere in the area of the Rhine Rift System

The Rhine Rift System (RRS) forms part of the European Cenozoic Rift System (ECRIS) and transects the Variscan Orogen, Permo-Carboniferous troughs and Late Permian to Mesozoic thermal sag basins. Crustal and lithospheric thicknesses range in the RRS area between 24-36km and 50-120km, respectively. We discuss processes controlling the transformation of the orogenically destabilised Variscan lithosphere into an end-Mesozoic stabilised cratonic lithosphere, as well as its renewed destabilisation during the Cenozoic development of ECRIS. By end-Westphalian times, the major sutures of the Variscan Orogen were associated with 45-60km deep crustal roots. During the Stephanian-Early Permian, regional exhumation of the Variscides was controlled by their wrench deformation, detachment of subducted lithospheric slabs, asthenospheric upwelling and thermal thinning of the mantle-lithosphere. By late Early Permian times, when asthenospheric temperatures returned to ambient levels, lithospheric thicknesses ranged between 40km and 80km, whilst the thickness of the crust was reduced to 28-35km in response to its regional erosional and local tectonic unroofing and the interaction of mantle-derived melts with its basal parts. Re-equilibration of the lithosphere-asthenosphere system governed the subsidence of Late Permian-Mesozoic thermal sag basins that covered much of the RRS area. By end-Cretaceous times, lithospheric thicknesses had increased to 100-120km. Paleocene mantle plumes caused renewed thermal weakening of the lithosphere. Starting in the late Eocene, ECRIS evolved in the Pyrenean and Alpine foreland by passive rifting under a collision-related north-directed compressional stress field. Following end-Oligocene consolidation of the Pyrenees, west- and northwest-directed stresses originating in the Alps controlled further development of ECRIS. The RRS remained active until the Present, whilst the southern branch of ECRIS aborted in the early Miocene. Extensional strain across ECRIS amounts to some 7km. Plume-related thermal thinning of the lithosphere underlies uplift of the Rhenish Massif and Massif Central. Lithospheric folding controlled uplift of the Vosges-Black Forest Arc

Tectonic and metamorphic evolution of the Central Himalayan Domain in Southeast Zanskar (Kashmir, India)

La région du Zanskar, étudiée dans le cadre de ce travail, se situe au passage entre deux domaines himalayens fortement contrastés, la Séquence Cristalline du Haut Himalaya (HHCS), composée de roches métamorphiques et l'Himalaya Tethysien (TH), composé de séries sédimentaires. La transition entre ces deux domaines est marquée par une structure tectonique majeure, la Zone de Cisaillement du Zanskar (ZSZ), au sein de laquelle on observe une augmentation extrêmement rapide, mais néanmoins graduelle, du degré du métamorphisme entre le TH et le HHCS. Il a été établi que le HHCS n'est autre que l'équivalent métamorphique des séries sédimentaires de la base du TH. C'est principalement lors d'un épisode de mise en place de nappes à vergence sudouest, entre l'Eocène moyen et l'Oligocène, que les séries sédimentaires de la base du TH ont été entraînées en profondeur où elles ont subi un métamorphisme de type barrovien. Au début du Miocène, le HHCS à été exhumé en direction du sud-ouest sous forme d'une grande nappe, délimitée a sa base par le MCT (principal chevauchement central) et à son sommet par la Zone de Cisaillement du Zanskar. L'ensemble des zones barroviennes, de la zone à biotite jusqu'à la zone à disthène, a été cisaillée par les mouvements en faille normale au sommet du HHCS et se retrouve actuellement sur une épaisseur d'environ 1 kilomètre au sein de la ZSZ. La décompression associée à l'exhumation du HHCS a provoqué la fusion partielle d'une partie du HHCS et a donné naissance à des magmas de composition leucogranitiques. Grâce à la géothermobarometrie, et connaissant la géométrie de la ZSZ, il nous a été possible de déterminer que le rejet le long de cette structure d'extension est d'au moins 35?9 kilomètres. Une série d'arguments nous permet cependant de suggérer que ce rejet aurait pu être encore bien plus important (~100km). Les données géochronologiques nous permettent de contraindre la durée des mouvements d'extension le long de la ZSZ à 2.4?0.2 Ma entre 22.2?0.2 Ma et 19.8?0.1 Ma. Ce travail apporte de nouvelles données sur les processus métamorphiques, magmatiques et tectoniques liés aux phénomènes d'extension syn-orogeniques.<br/><br/>The southeastern part of Zanskar is located at the transition between two major Himalayan domains of contrasting metamorphic grade, the High Himalayan Crystalline Sequence (HHCS) and the Tethyan Himalaya (TH). The transition between the TH and the HHCS is marked by a very rapid, although perfectly gradual, decrease in metamorphic grade, which coincides with a major tectonic structure, the Zanskar Shear Zone (ZSZ). It is now an established fact that the relation between the HHCS and the TH is not one of basement-cover type, but that the metasedimentary series of the HHCS represent the metamorphic equivalent of the lowermost sedimentary series of the TH. This transformation of sedimentary series into metamorphic rocks, and hence the differentiation between the TH and the HHCS, is the consequence of crustal thickening associated to the formation of large scale southwest vergent nappes within the Tethyan Himalaya sedimentary series. This, Middle Eocene to Oligocene, episode of crustal thickening and associated Barrovian metamorphism is followed, shortly after, by the exhumation of the HHCS as a, large scale, south-west vergent, nappe. Foreword The exhumation of the HHCS nappe is marked by the activation of two contemporaneous structures, the Main Central Thrust at its base and the Zanskar Shear Zone at its top. Extensional movements along the ZSZ, caused the Barrovian biotite to the kyanite zones to be sheared and constricted within the ~1 km thick shear zone. Decompression associated with the exhumation of the HHCS induced the formation of leucogranitic magmas through vapour-absent partial melting of the highest-grade rocks. The combination of geothermobarometric data with a geometric model of the ZSZ allowed us to constrain the net slip at the top of the HHCS to be at least 35?9 kilometres. A set of arguments however suggests that these movements might have been much more important (~ 100 km). Geochronological data coupled with structural observations constrain the duration of ductile shearing along the ZSZ to 2.4?0.2 Ma between 22.2?0.2 Ma and 19.8?0.1 Ma. This study also addresses the consequences of synorogenic extension on the metamorphic, tectonic and magmatic evolution of the upper parts of the High Himalayan Crystalline Sequence

Geosciences Roadmap for Research Infrastructures 2025–2028 by the Swiss Geosciences Community

This community roadmap presents an integrative approach including the most urgent infrastructure requests for the future development of geosciences in Switzerland. It recommends to strengthen the multidisciplinary nature of the geosciences by putting all activities under the roof of the Integrated Swiss Geosciences supported by four specific research infrastructure pillars. The roadmap represents the view of the Swiss scientific community in the field of geosciences and is a formal element of the process to elaborate the Swiss Roadmap for Research Infrastructures 2023. This bottom-up contribution to the identification and selection of important national and international research infrastructures has been coordinated by the Swiss Academy of Sciences (SCNAT) on a mandate by the State Secretariat for Education, Research and Innovation (SERI).ISSN:2297-1564ISSN:2297-157

Cenozoic uplift of Variscan Massifs in the Alpine foreland : timing and controlling mechanisms

The European Cenozoic Rift System (ECRIS) and associated fault systems transect all Variscan Massifs in the foreland of the Alps. ECRIS was activated during the Eocene in the foreland of the Pyrenees and Alps in response to the build-up of collisionrelated intraplate stresses. During Oligocene and Neogene times ECRIS evolved by passive rifting under changing stress fields, reflecting end Oligocene consolidation of the Pyrenees and increasing coupling of the Alpine Orogen with its foreland. ECRIS is presently still active, as evidenced by its seismicity and geodetic data. Uplift of the Massif Central and the Rhenish Massif, commencing at the OligoceneMiocene transition, is mainly attributed to plume-related thermal thinning of the mantlelithosphere. Mid-Burdigalian uplift of the SWNE-striking VosgesBlack Forest Arch, that has the geometry of a doubly plunging anticline breached by the Upper Rhine Graben, involved folding of the lithosphere. Late Burdigalian broad uplift of the northern parts of the Bohemian Massif reflects lithospheric buckling whereas late MiocenePliocene uplift of its marginal blocks involved transpressional reactivation of pre-existing crustal discontinuities. Crustal extension across ECRIS, amounting to no more than 7 km, was compensated by a finite clockwise rotation of the Paris Basin block, up warping of the WealdArtois axis and reactivation of the Armorican shear zones. Intermittent, though progressive uplift of the Armorican Massif, commencing in the Miocene, is attributed to transpressional deformation of the lithosphere. Under the present-day NW-directed compressional stress field, that came into evidence during the early Miocene and further intensified during the Pliocene, the Armorican Massif, the Massif Central, the western parts of the Rhenish Massif and the northern parts of the Bohemian Massif continue to rise at rates of up to 1.75 mm/y whilst the VosgesBlack Forest arch is relatively stable. Uplift of the Variscan Massifs a

Crustal evolution of Western and Central Europe

A new Moho depth map has been assembled for Western and Central Europe and the Western Mediterranean area that is exclusively based on published regional Moho depth maps. Tectonic overlays summarize Caledonian and Variscan tectonic units, Permo-Carboniferous fault systems and magmatic provinces, Mesozoic and Cenozoic rift-wrench systems, areas of intraplate compression, the outlines of Alpine orogens and the distribution of oceanic crust. Based on a comparison of these overlays with the Moho depth map we assess processes that controlled the evolution of the crust in the various parts of Europe through time. The present-day crustal configuration of Western and Central Europe results from polyphase Late Palaeozoic to recent lithospheric deformation that overprinted the margin of the Proterozoic East European Craton and particularly the Caledonian and Variscan crustal domains. Following consolidation of the Caledonides, their crustal roots were destroyed in conjunction with Devonian wrench tectonics and back-arc rifting. During the Permo-Carboniferous tectonomagmatic cycle, wrench faulting disrupted the crust of the Variscan Orogen and its foreland and the lithosphere of these regions was thermally destabilized. Late Permian and Mesozoic re-equilibration of the lithosphere-asthenosphere system was interrupted by the development of the Arctic-North Atlantic, Tethyan and associated rift systems. During the Alpine orogenic cycle, intraplate compressional stresses controlled basin inversion-related crustal thickening and lithospheric folding, as well as the evolution of the Rhine-Rhone rift system. Variably deep crustal roots characterize the Alpine orogenic chains. Neogene back-arc extension disrupted the eastern Pyrenees, Betic-Balearic, Apennine and Dinarides orogens

Feedback between erosion and active deformation : geomorphic constraints from the frontal Jura fold-and-thrust belt (eastern France)

A regional tectono-geomorphic analysis indicates a Pliocene to recent rock uplift of the outermost segment of the Jura fold-and-thrust belt, which spatially coincides with the intra-continental Rhine-Bresse Transfer Zone. Elevated remnants of the partly eroded Middle Pliocene Sundgau-Foreˆt de Chaux Gravels identified by heavy mineral analyses allow for a paleo-topographic reconstruction that yields minimum regional Latest Pliocene to recent rock uplift rates of 0.05 ± 0.02 mm/year. This uplift also affected the Pleistocene evolution of the Ognon and Doubs drainage basins and is interpreted as being tectonically controlled. While the Ognon River was deflected from the uplifted region the Doubs deeply incised into it. Focused incision of the Doubs possibly sustained ongoing deformation along anticlines which were initiated during the Neogene evolution of the thin-skinned Jura fold-and-thrust belt. At present, this erosion-related active deformation is taking place synchronously with thick-skinned tectonics, controlling the inversion of the Rhine-Bresse Transfer Zone. This suggests local decoupling between seismogenic basement faulting and erosion-related deformation of the Mesozoic cover sequences